East Bank District Chilled Water Connections Phase 2 Addendum 2

Agency:	University of Minnesota
Level of Government:	State & Local
Category:	41 - Refrigeration, Air Conditioning and Air Circulating Equip. Y - Construction of Structures and Facilities Z - Maintenance, Repair or Alteration of Real Property
Opps ID:	NBD16744315144583170
Posted Date:	Dec 11, 2023
Due Date:	Dec 14, 2023
Solicitation No:	01-000-22-1761B

Bid Information

Type	Construction Services
Status	Issued
Number	01-000-22-1761B Addendum 2 (East Bank District Chilled Water Connections Phase 2)
Issue Date & Time	11/20/2023 03:18:20 PM (CT)
Close Date & Time	12/14/2023 02:00:00 PM (CT)
Time Left	2 days 19 hours 10 minutes 37 seconds
Notes	Construction Services for phase 2 of chilled water connections on the east bank of the Twin Cities campus . Refer to the Request for Proposal documents (found in the Attachments tab) for full project details/requirements. Respondents are prohibited from contacting the identified department about this RFP while in process. Before submitting questions about the RFP via the Questions Tab, read and review the RFX INSTRUCTIONS, REQUIREMENTS, AND RIGHTS RESERVED BY THE UNIVERSITY DOCUMEN T and ALL Attributes in the Attributes Tab. These provide valuable information and address frequently asked questions. Remember to submit your response, including attachments, early to allow time to correct errors. The submission deadline is a hard close. The system will reject responses with errors and will NOT allow late submissions.

Contact Information

Bid Attachments

File Name

Data pager

Page size:

PageSizeComboBox

Your browser does not support inline frames or is currently configured not to display inline frames.

7 items in 1 pages

Request for Proposal

317 KB

RFx Instructions, Requirements, and Rights Reserved by the University

216 KB

PWR.zip

Current Prevailing Wage Rates

478 KB

Schedule of Values Cost Sheet

222 KB

CDs.zip

Construction Documents

3.07 MB

2430_001.pdf

Addendum # 1: Pre-Proposal Meeting Sign-in Sheet

80 KB

Addendum # 2 Drawings

1.73 MB

Bid Questions

Question	What is the purpose/design of the circulator pumps?
Answer	Circulator pumps shall operate in heating season to ensure chilled water coils do not freeze as the system will remain filled.
Submitted	12/4/2023 06:08:48 PM (CT)

Question	What is the ingress for the coils? Because we may need to have additional split coils depending on the answer.
Answer	All coils appear to have sufficient space for pull according to existing drawings.
Submitted	12/4/2023 06:08:27 PM (CT)

Question	Were the following coil dimensions transposed in terms of length and width? S-5 and S-6 and S-10 through S-13 and S-16 through S-19
Answer	Coils dimensions have been updated to align with existing cutsheet orientations.
Submitted	12/4/2023 06:07:37 PM (CT)

Question	Were the following coil dimensions transposed in terms of length and width?
Answer	Coils dimensions have been updated to align with existing cutsheet orientations.
Submitted	12/4/2023 06:06:14 PM (CT)

Question	If the coils are mounted in the horizontal position can the width and height be reversed on the schedules to allow for single coils rather than stacked?
Answer	All coils are in vertical position with horizontal airflow per the existing cutsheets.
Submitted	12/4/2023 06:05:33 PM (CT)

Question	Are the coils mounted in horizontal position with vertical airflow?
Answer	All coils are in vertical position with horizontal airflow per the existing cutsheets.
Submitted	12/4/2023 06:04:23 PM (CT)

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.